Motorsport Parts
6 POLE F.I.A BATTERY MASTER CUT OFF SWITCH AND RESISTER, WHICH ISOLATES ENGINE AND PROTECTS ALTERNATOR CIRCUIT AGAINST HEAVY VOLTAGE SURGE AND PREVENTS ENGINE RUN-ON. CONTROLS CIRCUITS UP TO 500 AMPS INITIAL LOAD WITH 100 AMPS CONTINUOUS LOAD 12-24V. SPARE KEYS ARE ALSO AVAILABLE.
Battery cut off switch part number GE55 £24.99
Spare key part number KEY55 £2.99
Spare diode resister part number GE55D £3.29
MAP LIGHT- TWO LENGTHS AVAILABLE AND FOUR DIFFERENT STYLES
AVANTI 70 SERIES end beam without switch
12" GE40 £22.79 18" GE41 £22.99
AS ABOVE BUT WITH on/off SWITCH
12" GE45 £23.79 18" GE46 £23.99
AVANTI RALLY side beam without on/off switch
12" GE42 £27.49 18" GE43 £27.99
AS ABOVE BUT WITH on/off SWITCH
12" GE48 £28.49 18" GE49 £28.99
COMPETITION SEAT BELT FITTINGS
These Graystone belt fittings are supplied to most major harness/seatbelt manufacturer, and are used by most road/race/rally etc works teams.
Anchor plates - double slot - Part Number S78 £1.79
2" 3 Bar Slider - Black Coated - Part Number S83B £1.69
3" 3 Bar Slider - Black Coated - Part Number S84B £1.89
2" Snap Hook with black plastic dipped end - Zinc Plated - Part Number S89 £1.89
2" Snap Hook - Zinc Plated - Part Number S90 £1.81
3" Snap Hook - Zinc Plated Part Number S91 £3.10
Quick Release Buckle Tang - Zinc Plated Part Number S94 £1.59
3" Belt Adjuster - Zinc Plated Part Number S96 £4.65
1" Moustache Tang Zinc Plated Part Number S97 £1.89
2" Flat Anchor Plate - Zinc Coated Part Number S98 £1.69
Loose Seat Belt Eye Bolt 23mm long thread Zinc Plated Part Number GE50A £1.72
Loose Seat Belt Eye Bolt 32mm long thread Zinc Plated Part Number GE50AL £1.85
Loose Seat Belt Eye Bolt 50mm long thread Zinc Plated Part Number GE50AL50 £3.10
Loose Seat Belt Back Plate - Zinc Coated Part Number GE50B £0.89
Loose Square Seat Belt Back Plate - Zinc Coated Part Number GE50BS £0.95
Loose FIA Square Seat Belt Back Plate - Zinc Coated Part Number GE50BS-FIA £ 1.25
COMPETITION BONNET PIN
|
AS USED BY MOST MAJOR WORKS RALLY TEAMS
|
|
ALLOY COMPETITION BONNET PIN KIT |
|
Slide plate and pins manufactured from very strong lightweight high tensile aluminium. Used by most major works rally teams. Quick release slide action for securing bonnets, tailgates and boots.
GE52B.Blue
GE52G Gold
GE52R Red |
MICRO BONNET PINS
AVAILABLE SHORTLY
|
|
A smaller more compact version or our more familiar GE52 range of bonnet pins. Slide plate is made of anodised aluminium. Pins are made of zinc plated steel.
GE33B Blue
GE33R Red
GE33S Silver
.
. > |
From £10.69
SELF ADHESIVE ALUMINIUM BONNET PINS
|
This photo shows proportional difference of slide plate GE52
and GE33 Micro Bonnet Pins.
|
.
|
|
........
.
Manufactured from anodised aluminium and held in place by high quality self adhesive pads shaped to suit. these self adhesive bonnet pins will give your car that authentic works rally look.
GE32B Blue
GE32R Red
GE32S Silver |
|
From £10.49
GE58 QUICK RELEASE BONNET PINS |
|
Traditional type of quick release bonnet/boot fastener for securing bonnets and boots. Chrome plated steel with full fitting kit included
|
|
£6.99
GE52 COMPETITION BONNET PIN KIT |
|
Slide plate is manufactured from stainless sleel. Used by most major works rally teams. Quick release slide action for securing bonnets tailgates and boots.
|
£10.69
|
Suitable for use on boots, bonnets, panels and exhaust systems.
GE53 >>Stainless Steel
GE53B Black coated Stainless Steel
|
|
£9.99
GE55 F.I.A BATTERY MASTER CUT OFF SWITCH |
|
6 pole F.I.A master battery cut off switch isolates engine and protects alternator circuit against heavy voltage surge and prevents engine 'run-on'. Controls circuits up to 500 amps initial load with 100 amps continuous load 12 - 24v.
|
£24.99
GE54 BATTERY CUT OFF SWITCH
|
|
|
300 amp initial load, 100 amps continuous 12-24v battery cut off switch. A simple way to isolate vehicles electric's in case of fire or accident. Also when fitted, in can be used as an anti theft device and stops drain on the battery when the vehicls or equipment are not in use.
|
£7.10
GE76 METAL BATTERY CUT OFF SWITCH |
|
12v or 24v metal bodied fixed key battery cut off switch rated at 12v 100 amp continuous loading, 500 amp for 10 seconds.
|
|
£13.30
COMPETITION ' T ' PULL CABLES |
|
1.5 or 3 metres long suitable for use with battery switches / fire extinguishers / fire extinguisher systems / boot or bonnet catches etc.
GE60B 1.5 metre black 't' handle pull cable
GE60R 1.5 metre red 't' handle pull cable
GE61B 3 metre black 't' handle pull cable
GE61R 3 metre red 't' handle pull cable |
1.5m £9.50 3m £12.60
|
Supplied in sets with bolts and nylock nuts, manufactured from high tensile extra light aluminium anodised to protect.
GE57... Silver
GE57B.Blue
GE57R Red |
IMPORTANT THIS PRODUCT IS FOR COMPETITION OR OFF-ROAD UES ONLY. THE PRODUCT MUST BE PROPERLY FITTED. DO NOT USE UNLESS THERE IS 50MM CLEARANCE BETWEEN PEDALS AFTER FITTING. IT MUST BE POSSIBLE TO OPERATE ANY PEDAL OVER ITS FULL TRAVEL WITHOUT INADVERTENTLY OPERATING OR INTERFERING WITH ANY OTHER PEDAL. IT IS ESSENTIAL TO RETAIN FULL PEDAL CONTROL AT ALL TIMES.
|
£15.50
GE66 BONNET / BOOT LOCK FLUSH FITTING |
|
|
Chrome plated finish with flush face plate that does not protrude above body line. Supplied with 2 radial pin keys foe extra security. This bonnet lock complies with EEC Regulations |
IMPORTANT
|
THIS PRODUCT MUST NOT BE USED UNLESS IT IS FITTED IN CONJUNCTION WITH THE ORIGINAL MANUFACTURERS OWN BONNET SAFETY CATCH, THIS ESPECIALLY APPLIES TO CARS WITH FIBRE GLASS BONNETS.
|
£15.65
COMPETITION RUBBER BONNET/BOOT HOOK KITS
|
TOGGLE FASTENERS
|
>
>
|
Supplied in pairs with all fixings, suitable for securing panels, bonnets or boots, many other uses.
GE62 Small
GE63 Large |
|
Chrome plated or black, supplied in pairs. Used for keeping panels, boots, tailgates shut at high speed. Standard or lockable types.
GE64 Chrome plated large type
GE64B Black coated large type
GE65 Chrome plated small lockable with padlock eye
GE65B Black coated small lockable with padlock eye
|
|
|
PLEASE CALL FOR PRICES
GE56 COMPETITION SPOT LAMP STEADY BARS
|
GE59 ADJUSTABLE COMPETITION SPOT LAMP STEADY BARS
|
|
Supplied in pairs, can be bent to suit. Helps reduce spot lamp vibration. Also used to stabilise front spoilers / splitters
|
|
Supplied in pairs, made with left and right hand threads so the can be adjusted for tightness after fitting, helps stop lamp vibration. Also suitable for fitting and adjusting front spoilers and splitters.
£13.20
|
£10.30 |
TEHF6-50/TS6-300
DZUS self-edjecting fasteners are designed for use on curved or contoured surfaces where ejection of the fastener is essential to remove the top panel
T1500/T150003
DZUS slide latch comprises a sliding bar which is supplied assembled to a housing/mounting plate which is rivetted to the panel
|
|
PLEASE CALL FOR PRICES
COIL SPRING CLAMPS
Used to either raise or lower the suspension on vehicles with coil springs. 1 Pack fits one spring
£9.75
|